14
TANDBERG Videoconferencing System
Installation
I
MPORTANT
T
HE
CAMERA
SHOULD
BE
ALIGNED
WITH
THE
FRONT
EDGE
OF
THE
MONITOR
TO
ENSURE
THAT
THE
IR-
SENSOR
IN
THE
CAMERA
CAN
PICK
UP
SIGNALS
FROM
THE
REMOTE
CONTROL
.
• Place the monitor on top of the cabinet/top plate and ensure it is stable.
• You may fasten the monitor to the cabinet using the securing kit.
• Take the camera and remove the plastic backing from the double sided tape-pads on the base of the unit. Place
the camera centrally, on top of the monitor close to the front. If the system has two monitors, place the camera
on the left monitor (where menus and incoming picture will be displayed).
NOTE
