8
Menu Tree Menu Tree
Service Setup
Press OPTION
Service:
PROGRAM 1
< >
Press ENTER to activate
Select Video
Video
1
Select Audio
Audio
1
Select Teletext
OFF
Select AuxData
ON
Self Test
in progress
Receiver Setup
Press OPTION
Frequency:
1070.00 MHz
Press ENTER to acquire
Symbol Rate:
13.3330 MS
Press ENTER to acquire
Viterbi Rate:
3/4
Press ENTER to acquire
Acquisn Bw:
00004 MHz
Press ENTER to acquire
LNB Polarity:
Horz
Press ENTER to acquire
Satellite Band:
Ku-High
Press ENTER to acquire
LNB Offset:
00000
MHz
Press ENTER to acquire
Receiver Mode:
Normal
Press ENTER to acquire
LNB Voltage:
ON
Press ENTER to acquire
Receiver Setup Notes
All of the receiver settings must be entered properly in order to
acquire the signal.
If the acquisition fails, RECEIVER NOT ACQUIRED will
display for 2 seconds, and the receiver will return to the
display where the acquisition was initiated.
If any entries are out of the valid range, the receiver will
display an INVALID ENTRY message.
950-2150 MHz
1-45 Ms/sec.
1/2,2/3,3/4,5/6,7/8
Default = 4MHz
Vert/Horz
C, Ku-Low,
Ku-High, User
Normal/Install
On/Off
Service Setup Notes
Video, Audio, and Teletext screen will only be
displayed if that service is available on the incoming
data stream.
If Service name is not transmitted, UNNAMED is
displayed.
Wait...
MENU
OPTION
OPTION
OPTION
OPTION
OPTION
OPTION
OPTION
OPTION
OPTION
OPTION
OPTION
CSR820 Menu System
This diagram includes all of the menus and submenus in the
CSR820 menu system.
Arrows indicate the order of submenus within each main menu. Press
OPTION or MENU as indicated.
Items that you may enter are shown in
bold
type.
Default entries are shown on each screen. Ranges or options for each menu
are shown in
italics
.
Note boxes provide additional information about the menus.
If you enter a Password, an
*
symbol will appear in the upper right corner
of each screen.
Default is 1
Default is 1
On or Off
(PAL only)
On or Off
Select
Service
Only available if you
select User in the
previous menu
Service PROGRAM 1
Receiver: Idle
MENU
0
Enter 4 digit Password
OPTION
MENU
OPTION
OPTION
OPTION
OPTION
Enter a password if you want to
make changes and * appears on
upper R/H corner.
Press MENU if you want to view
settings only.
Signal Quality: 0000
Press any key to exit
Signal Quality appears if the
receiver is in Install mode.
MENU
