TANDBERG Codian HD MCU 4500 Series, Руководство по началу работы

Страница: 11 / 19

Configuring the MCU
7
Configuring the MCU
Step one: Log in to the MCU
All administration of the MCU is performed via the web interface.
To log in to the web interface of the MCU:
1
Use your browser to navigate to the IP address of the MCU (to discover the IP
address, refer to the previous section).
2 Click the
Log in
link on the top right of the screen, then click
Change log in
and enter the user name
admin
with no password.
Step two: Using an H.323 gatekeeper or SIP registrar (optional)
If you have H.323 endpoints, using an H.323 gatekeeper can make it easier for
participants to call in to a conference. You can configure the MCU to use an external
gatekeeper or its own built-in gatekeeper. For information about using the built-in
gatekeeper, refer to the online help.
If you have SIP endpoints, using a SIP registrar can make it easier for participants to
call in to a conference.
To configure the MCU to use an H.323 gatekeeper:
1
In the web interface of the MCU, go to
Settings > Gatekeeper
.
2 Enable
H.323 gatekeeper usage
and configure the settings you require, using
the online help for further assistance.
3 Click
Apply changes
.
To configure the MCU to use a SIP registrar:
1
In the web interface, go to
Settings > SIP
.
2 Configure the settings you require, using the online help for further assistance.
3 Click
Apply changes
.
Codian recommends that you change the admin account to use a
password as soon as possible. To do that, go to
Users
, click the
admin
link, and provide the required user information.
Before you configure the MCU to use, and register conferences to, a SIP
registrar, you must set up the MCU and its conferences on that SIP
registrar.
i
i