What’s in this guide?
Getting started
Making calls
Using the phone book
In-call features
Advanced settings
Advanced settings
36
D14503.01 USER GUIDE TANDBERG QUICK SET C20—July 2009
Softbutton—Camera Preset
If you want direct access (via the softbuttons along the bottom line of
the screen) to predefined camera presets, you should assign the function
Camera preset
to one or more of the softbuttons.
Note that camera presets must have been defined before you start
assigning presets—see page 10 for more on camera presets.
In the following we will use
S
OFTBUTTON
1
as an example, but the function
may be assigned to any of the five softbuttons.
Do as follows:
1.
Navigate down to the softbuttons options as shown on page 34. Make
sure you have decided whether your setting shall apply to idle or in
call. If you want it to apply to both situations you must do this twice,
one setting for each case—see the tip on page 34 for more on this.
2.
Expand the
Camera preset
menu.
3.
Use the
VERTICAL
ARROW
keys to go between the presets existing.
4.
Press the key to exit the menu putting changes into effect or the
LEFT
ARROW
key to leave the menu going one step back.
Below is a screenshot showing how the softbuttons appear when
assignments have been made.
