TANDBERG Border Controller Скачать руководство пользователя страница 81

Страница: 81 / 118

TANDBERG Border Controller User Guide

Page 81 of 118

xconfiguration Authentication Mode: <On/Off>

Specifies whether or not to use H.235 authentication of calls and registrations. The default is

Off

: no

authentication is required.

xconfiguration Authentication UserName: <username>

Specifies the user name to be used by the Border Controller when authenticating with another system.

xConfiguration Authentication Password: <password>

Specifies the password to be used by the Border Controller when authenticating with another system.

18.2.2.

Ethernet

xconfiguration Ethernet Speed: <Auto/10half/10full/100half/100full>

Sets the speed of the Ethernet link. Use

Auto

to automatically configure the speed. The default is

Auto

You must restart the system for changes to take effect.

Note:

to find out the current speed, use

xstatus Ethernet Speed

18.2.3.

ExternalManager

xconfiguration ExternalManager Address: <address>

Sets the address of the External Manager. This can be either an IP Address or, if DNS is configured, a

FQDN. The External Manager is the remote system, such as the TANDBERG Management Suite (TMS),
used to manage endpoints and network infrastructure.

xconfiguration ExternalManager Path: <path>

Sets the URL of the External Manager.

18.2.4.

Gatekeeper

Commands under the

Gatekeeper

node control aspects of the system's operation as an H.323

gatekeeper.

xconfiguration Gatekeeper Alternates Monitor: <On/Off>

Controls whether or not alternate gatekeepers are periodically interrogated to ensure that they are still
functioning. In order to prevent delays during call setup, non-functional alternates will not receive

Location Requests .

xconfiguration Gatekeeper Alternates Alternate [1..5] Address:
<IPAddress>

Sets the IP address of an alternate Border Controller. Up to 5 alternates may be configured. When the

Border Controller receives a Location Request, all alternates will also be queried.

xconfiguration Gatekeeper Alternates Alternate [1..5] Port: <Port>

Sets the IP port of an alternate Border Controller. The default is

1719

xconfiguration Gatekeeper AutoDiscovery: <On/Off>

Specifies whether or not the Border Controller responds to gatekeeper discovery requests from
endpoints. The default is

Содержание Border Controller























































































































Результаты поиска

Содержание Border Controller

Отзывы:

TANDBERG Border Controller, Руководство пользователя, Страница: 81 / 118

Результаты поиска

Содержание Border Controller

Отзывы: