TANDBERG Videoconferencing System
31
General use
Presets
The preset buttons enable you to pre-store up to ten different settings. Each preset is able to store:
• Video source
• Camera position, pan/tilt/zoom/focus/brightness (if Main Camera)
• Audio source selection (see ‘Audio Settings’ in ‘Advanced use’)
Selecting presets
To select a pre-stored camera position, audio and video source, use the keys
P1 P2 P3
or press
P
until the on-
screen indicator ‘
Preset 0-9
’appears and use 0-9 to activate P0-P9 presets. To exit ‘Preset’ mode, press
O
K
.
P1-P3 are the same presets as when pressing
P
and then a number key
1-3
.
Storing presets
To store the current camera position, audio and video source:
•
Press
S
TORE
once and wait for the on-screen indicator to appear.
•
Then press one of the keys
P1 P2 P3
or a number key
0-9
.
store
P
1
P
2
P
3
Storing preset 10 to 15
To store preset 10-15 the TANDBERG Tracker has to be used:
• Select which preset to be used on the TANDBERG Tracker (see separate documentation).
• Press
S
TORE
once on the TANDBERG Remote Control and wait for the on-screen indicator to appear.
• Then press the ‘single person’ button on the TANDBERG Tracker.
See the Tracker section in ‘Peripheral Equipment’ for more information about the TANDBERG Tracker.
0 1 2
3
4
5
678
9A
B
C
D
E F
