RDX QuikStation 4 and 8 Product Manual
8 - System Maintenance
1021970 Rev. D
©2016-18 Tandberg Data GmbH
99
System Restart
1.
From the Remote Management Console main menu, select
System Maintenance > System
Restart
.
2.
Click
Yes
to confirm.
The system reboots. This process takes three minutes. When the reboot is complete, the
Remote Management Console interface is active again. You do not have to sign in again
to access the Console.
System Shutdown
1.
From the Remote Management Console main menu, select
System Maintenance > System
Shutdown
.
2.
Click
Yes
to confirm.
If you cannot access the Remote Management Console, verify that your network
infrastructure is up and running and you are using a correct IP address. Contact
technical support if you need further assistance.
If the Remote Management Console is unavailable, you can initiate an OS shutdown by
quickly pressing the power button (less than one second).
CAUTION:
If you press and hold power button for more than three (3) seconds, you will
immediately cut off the unit’s power for a hard power-off without any software shut down.
Any non-disconnected iSCSI connection would be terminated. It is strongly advised to
avoid using power button as a standard procedure.
Export RDX QuikStation System Configuration Files
As a best practice, Tandberg Data recommends that you export your system configuration files
as a backup in case you ever need to replace your current unit. The system exports all
configuration settings, including network information, email notification settings, time zone
setting, user names and passwords, logical device type settings, and iSCSI security settings.