RDX QuikStation 4 and 8 Product Manual
2 - Initial Setup and Configuration
1021970 Rev. D
©2016-18 Tandberg Data GmbH
20
Logical Device Type
You can configure your RDX QuikStation as multiple RDX drives (four or eight) or one RDX
Logical Volume. The unit is shipped in the multiple RDX drive configuration.
For more information about best use for each logical device type, see
.
System Settings
Refer to the table below for the recommended RDX QuikStation system settings. For more
information, see
“System Settings Overview” on page 38
Setting
Purpose
Where to find
Date/Time
Set the date and time to your time
zone to receive accurate system and
troubleshooting information. To avoid
time drift, provide the NTP server
address.
From the main menu bar in the
Remote Management Console, go to
System Settings > Date/Time
.
“Date and Time Configuration” on
for more information.
Network Information
Tandberg Data recommends that you
assign a static IP address to prevent
inadvertent IP address changes of the
iSCSI target. You can also configure
optional DNS server addressing
information.
From the main menu bar in the
Remote Management Console, go to
System Settings > Network
. The
RDX QuikStation automatically
reboots after you have made your
network changes.
See
for more information.