Tandberg Data Magnum 448, Руководство пользователя

Страница: 16 / 16

16
OF
16
The library is now ready to resume operation. The new tape drive defaults to the following SCSI IDs:
C
ONFIRMING THE
I
NSTALLATION
You may want to perform a few load and unload operations and back up several megabytes of data to ensure
that the library and the newly installed tape drive (or tape drives) are communicating correctly.
Download and install the tools from www.tandbergdata.com . The readme file that accompanies the program (or
the online help for the Windows version) provides instructions for using the tools.
For questions regarding software configuration, installation, or operation (including how to perform a backup
operation)—contact your software provider.
Copyright 2009 Tandberg Data Corporation: Tandberg Data, Exabyte, the Exabyte Logo, EZ17, M2, SmartClean, VXA, and VXAtape are registered trademarks; ExaBotics and MammothTape are
trademarks; SupportSuite is a service mark. Linear Tape-Open, LTO, the LTO Logo, Ultrium and the Ultrium Logo are trademarks of HP, IBM, and Quantum in the US and other countries. All other
product names are trademarks or registered trademarks of their respective owners.
P/N 1017477 Rev C September 2009 www.tandbergdata.com
#1017477C#
Library Tape Drive Configuration SCSI ID
Magnum 448
Single full height tape drive 3
Two full height tape drives
Top tape drive 4
Bottom tape drive 3
Single half height tape drive 3
Four half height tape drives
Top tape drive 6
Third tape drive 5
Second tape drive 4
Bottom tape drive 3
!
Important
You may need to reconfigure your backup application to recognize the new tape drive.
Refer to your application’s documentation for instructions.
Use LibTool to
Detect the library
View the library’s cartridge inventory
Move tapes into and out of the tape drive
Use LTOTool to
Detect the tape drive
Perform a Read/Write test