Tandberg Data DAT 160, Руководство пользователя, Страница: 23 / 58

Therefore, assuming the HBA is the first device on the bus, you should check
that the second terminator is placed after the last device, as shown in
Figure 2-4 on page 22, item 1.
Secure the drive
Secure the drive, as described in your server documentation. Ensure blanking
plates are in place over empty bays and replace the cover on the server.
1. plastic rail
2. server latch, push down to lock the tape drive into position
Figure 2-5 Securing drive example 1, mounting hardware used
1. M3 screws, supplied with tape
drive
Figure 2-6 Securing drive example 2, no mounting hardware used
23
# August 2009
Secure the drive