- 46 -
5.1.2.5.4 Setting Cleaning mode
Operation 1
Ensure your Autoloader is in maintenance mode.
Display (line 1):
READY
Display (line 2):
F/W Rev.?
Operation 2
Press the
arrow
key and select "
CLEAN ROL?
" command.
Display (line 1):
READY
Display (line 2):
CLEAN ROL?
Operation 3
Press the
ENTER
key and define the command.
Display (line 1):
CLEAN ROLL
Display (line 2):
Eject Magz
Operation 4
Remove the magazine carefully.
Display (line 1):
CLEAN ROLL
Display (line 2):
Step 1 >>
5.1.2.5.5 Cleaning the Roller
Operation 1
Press the
arrow
key (
→
) and define the command.
Then, the Roller of the internal transporter moves the position of the
front side of the transporter as shown in figure 5-2. During moving the
Roller, LCD displays the next messages.
Display (line 1):
CLEAN ROLL
Display (line 2):
Caution
CAUTION
Do not insert your hands during displaying
Caution
message
as finger
s
may be pinched in the Roller.
Figure 5-2
(The Roller is contaminated intentionally for the explanation.)
