[Please read this installation & operation manual before install the device]
TXC3100 Conventional Smoke Detector
Page 4
Warning: Before installing the detector, switch off the controller or disconnect the power from the
loop and verify that all bases are securely installed.
5.1 Mounting: The mounting of detector is shown in Fig 3
Conduit
Wall
Embedded box
Detector
Base
Fig 3: TXC3100 Installation Drawing
The pre-embedded box can be the standard box with model 86H50; To install, align the two mounting lines on
both detector and base, then, rotate the detector clockwise to fit it to the base.
5.2 Wiring requirement:
Bus line: RVS-2*1.0 mm
2
or 1.5 mm
2
cable laid through metal conduit or fire-retardant PVC conduit
5.3 Wiring description
Wiring is shown in Fig 4 and Fig 5
Fig 4: Single TXC3100 wiring
Bus output
Bus input
Tanda Development Pte.,Ltd
Содержание TXC3100
Страница 1: ......
