TX7331 Intelligent Graphic Repeater Panel
Installation & Operation Manual
4050100365-Rev1.1-1117
TANDA UK
Specifications are subject to change without prior notice
11
4 General Maintenance
1.
Inform the suitable personnel before conducting the maintenance.
2.
Disable the Intelligent Graphic Repeater Panel on the control panel to prevent false alarm.
3.
Do not attempt to repair the circuitry of the Intelligent Graphic Repeater Panel, it may affect
the operation to respond to a fire condition and will void the manufacturer’s warranty.
4.
Notify again proper personnel after conducting the maintenance and make sure to enable
the Intelligent Graphic Repeater Panel and confirm if up and running.
5.
Perform the maintenance on semi-annually or depending on the site conditions.
5 Troubleshooting
What you notice
What it means
What to do
Address not enrolling
The wiring is loose
The address is duplicate
Conduct maintenance
Re-Commission the device
Unable to commission
The damage the electronic circuit
Replace the device
Appendix
1
Installation of the Main Board
As shown in the figure below is Main Board with Box weld nut Connection.
Appendix
2
Limitation of the LED Board
As shown in the figure below is LED Board with front panel weld nut Connection.