Tanda Me elos, Руководство пользователя

Страница: 27 / 138

28 EN
Troubleshooting
indicator What does it mean How to react
Control Panel
No lights are on. Power cable is not connected. Connect power cable.
Error light is blinking. 1. Button pressed for more than
10 seconds.
2. Grip sensors are held during
the start up test.
3. No cartridge level indication.
1. Release button (system will
return to standby mode).
2. Place applicator in cradle.
Press power on again.
3. Pull out cartridge and re insert.
If not working, insert a new cartridge.
elo- s level lights are blinking
+ IPL light pulses stop.
Ambient temperature is too high. Press elo- s button again.
If not working, move to a cooler
area with less than 30 Celsius/86.
Fahrenheit degrees.
Continuous error light. Need to reset the system. Reset.
Disconnect power cord.
Wait until all lights are off (up to two min).
Reconnect the power cord and turn on
the system.
No elo- s pulses. Not touching grip sensors.
RF bars are not in contact with
the treated area.
elo- s button is not pressed.
In order for the device to emit elo- s pulses,
make sure all 3 conditions (elo- s button
on, touching grip sensors and RF bars in
contact with the skin) are met.
Applicator
elo- s white light is blinking. elo- s slot is empty. Insert elo- s protective cap or elo- s cartridge.
epilator/shaver lights are
blinking.
Epilator/shaver slot is empty. Insert epilator, shaver or a protective cap.
If none of these suggested measures seem to help, contact your local provider for support, or
contact us at www.tanda.com.