Tanda Me elos, Руководство пользователя

Страница: 23 / 138

24 EN
and/or encounter any severe side effects,
discontinue treatment and consult with your
doctor.
How to use (watch video at www.tanda.com)
1. Before treating your facial hair with the
me- please cleanse your skin and remove
the hair on the surface of the skin.You
may remove the hair on your face with:
tweezers, wax, shaver etc.
2. The treatment should be performed
in a broad ambient light environment.
3. Conceal the delicate areas such
as lip edges and facial moles with a
white eyeliner.
4. Turn on your me- device.
5. Select the LOW
elo- s
level on the base
unit and press the
elo- s
button on your
applicator.
6. Use protective eyewear (may be included
in your package or in the facial kit you
acquired).
7. Apply a single evaluation pulse on
a hidden area on your face or neck and
observe treated area. If you observe
any unusual reaction, stop the treatment
immediately.
8. Hold the upper part of your me-
applicator without touching the two grip
sensors and gently position it on the area
you want to treat.
9. To allow an
elo- s
flash on the area you
want treat, touch momentarily both grip
sensors with the thumb and forefinger
of your other hand and release
after1pulse was emitted.
10.Without holding the grip sensors,
reposition the applicator on the next
area to be treated and repeat steps
8 and 9.
11.Repeat each treated area again 1
or 2 times with at least 10 seconds
before you go over the same spot.
12.If you feel comfortable you may
change elos level from low to med
or high.
13.We recommend treating the face
every 1-2 weeks and it is possible to
treat the face up to every 2 days!
* Always start with LOW
elo- s
level. If you
feel comfortable, you may increase the
elo-
s
level for enhanced efficacy.
grip sensors