TRACTOR CONNECTION (ARC)
1. Hydraulics
Red pipe
> Supply (50 lpm)
Blue pipe
> Return (
Free flow return!!)
2. Electrics
A. Connect 12V supply to 3pin plug
B. Connect wrapper harness to controller
C. Connect receiver to controller
ENTERING THE WORKING POSITION
1. Lower the rear of the machine to the ground
and adjust the hydraulic jack until the
machine is level.
2. Remove the transport bracket and lower the
unloading conveyor to the ground.
3. Adjust the working width of the rollers to
suit the size of bale being used.
Lock the rocking rollers in
place using the pin.
4. Install the roll of film and attach the film to
the Cut & Start.
The quick reference guide is not a substitute for the Operators Manual!
Please refer to Operators Manual for more detailed information
B
A
4
1
2
3
1814 S / ARC QUICK REFERENCE GUIDE
