EXPERT CONTROLLER OPERATION
RF REMOTE OPERATION
The RF (Radio Frequency) remote is required if you wish to operate the
1814 wrapper remotely.
Auto Start
wrapping
Close Cut & Start
- Auto Unload (A)
- Unload (M)
Emergency Stop
Rotate wrap arms
in reverse
Rotate wrap
arms forward
- Add additional
wraps (A)
- Rotate bale if not
level (A)
- Tip return (M)
Open Cut & Start
RF Receiver
The red button on the
rear of the remote must
be pressed while
pressing any other
button (except “STOP”).
- Current No. of wraps
- Target No. of wraps
- Wrapping speed (RPM)
- Bale total
- Grand total No. of bales
- Mode: Manual /Auto
Pause wrapping (A)
Rotate rollers (M)
Level bale for unloading (if
not level) (A)
Open cutter
Fast wrap arm rotate
Resume wrapping
Add additional wraps
Unload bale (A)
Tip & Rotate rollers (M)
Start Auto wrap cycle
Select Manual or Auto
4-way Menu switch:
- Set no. Of wraps
- Change/Reset Bale Sub-Total
- Access Operator Setup Menu
- Access Technician Setup Menu
Pause bale rotation (A)
Close cutter
Slow wrap arm rotate
Reverse wrap arm
Not used on S or ARC
Power on/off /
Emergency Stop
