MACHINE
SETUP
SUPPORT ROLLERS
To allow for stability of the bale during the wrapping process the support rollers
can be adjusted
different sized bales. It is important that the support rollers are adjusted so
that the bale is in the
middle of the table. When the bale is on the table the distance between the
ends of the
bale and the support rollers (D) should be <50mm.
SUPPORT ROLLER ADJUSTMENT
The support rollers have three adjustment positions (3). In order to move the
support roller (1) disconnect
the locking bolt (2) from its original position and move the roller to adjust to
distance D. Once the roller is
in its desired position fix it in place with the locking bolt (2).
D
D
B
3
2
1
A100 EH Operator’s Manual
22 //
49
