Tanaka TCG 22EAS(SLP), Инструкция по эксплуатации

Страница: 13 / 64

13
English
Fueling
WARNING
●
Always shut o ff the engine before refueling.
●
Slowly open the fuel tank, when fi lling up
with fuel, so that possible over-pressure
disappears.
●
Tighten the fuel cap carefully, after fueling.
●
Always move the trimmer at least 10 ft (3 m)
from the fueling area before starting.
●
Always wash any spilled fuel from clothing
immediately with soap.
●
Be sure to check for any fuel leakage after
refueling.
Before fueling, clean the tank cap area carefully,
to ensure that no dirt falls into the tank. Make sure
that the fuel is well mixed by shaking the container,
before fueling.
Starting
CAUTION
Before starting, make sure the cutting
attachment does not touch anything.
1. Set ignition switch (24) to ON position. (Fig. 21,
22)
26
24
Fig. 21
24
Fig. 22
* Push priming bulb (25) several times so that fuel
fl ows through return pipe (39). (Fig. 23)
25
39
Fig. 23
2. Set choke lever (27) to CLOSED position (A).
(Fig. 24)
27
B
A
Fig. 24
3. Pull recoil starter briskly, taking care to keep the
handle in your grasp and not allowing it to snap
back. (Fig. 25)
Fig. 25
000Book̲TCG22EAS̲US.indb 13 000Book̲TCG22EAS̲US.indb 13 2012/07/11 16:42:43 2012/07/11 16:42:43