POWER ON : Extraction & Clean Air with Micro Whirlwind Technology
Turn the device ‘on’ by pressing the red on
switch located on the Tan.Fresh Air Unit.
By Turning the unit on, the Micro-Whirlwind
extraction fan will help remove overspray in
the air of any room when spray tanning.
The Tan.Fresh Air Series of clean air
extraction systems works by extracting the
moisture (and any troublesome tanning
solution) from the air before it travels
throughout the room.
OPERATION
OPERATION MANUAL
REGISTER YOUR
2 YEAR GUARANTEE
T A N . F R E S H - A I R P O R T A B L E U N I T
TAN.FRESH AIR UNIT
IMPORTANT
REPLACE EACH TAN.FRESH AIR FILTER AFTER 100
SPRAY TANS (FULL BODY APPLICATION) OR AFTER 5
LITRES (169 FLOZ) OF PRODUCT
If the Tan.Fresh Air Unit gets dirty with overspray solution,
wipe down with Tan.Easy Cleaning Wipes. Alternatively you
can use a smooth cloth (avoid anything abrasive) with a
general household glass cleaner to maintain its clean finish.
WARNING: ALWAYS UNPLUG THE DEVICE
BEFORE CLEANING.
REPLACING THE FRESH AIR FILTER
The Tan.Fresh Air filter captures any fine mist
and reduces mess to ensure the environment is
comfortable for both clients & the user.
1. Switch off power supply to ensure the
Tan.Fresh Air Unit is not in operation.
2. Peel back the filter from one corner of the
Tan.Fresh Air Unit.
(We recommend using gloves to keep
hands clean)
3. Dispose of the old filter.
4. Using your hands carefully slide new filter
into the lip created by the frame and evenly
work the filter into position using your
hands.
CLEANING & MAINTENANCE:
IMPORTANT!
Do not turn the filters back to front to try and re-use the other side. They will
only work based on one air flow direction. It is important to check your filter and replace
according to instructions, to maintain performance. Do not put the filter in a dishwasher,
washing machine, tumble dryer, oven, microwave or near a naked flame. Dispose of filter
once used.
FULL BODY APPLICA-
100
ON/OFF
