SPRAY MACHINE
If the spray machine gets dirty with
overspray solution, wipe down with
Tan.Easy Cleaning Wipes. Alternatively
you can use a smooth cloth (avoid
anything abrasive) with a general glass
cleaner to maintain the gloss finish.
WARNING: ALWAYS UNPLUG
THE DEVICE BEFORE CLEANING.
IMPORTANT
WASH TUBRINE FILTER
WITH WATER AT LEAST
EVERY 6 MONTHS
WASHING YOUR TURBINE FILTER
The only maintenance necessary on the Tan.Lite &
Tan.Expert device is cleaning or changing the turbine
filter.
1. Remove the turbine filter from the filter housing
located above the air hose ‘Turn&Lock’ screw connect.
2. Wash under cold water. Do not use detergents to
clean the filter.
3. Please leave to dry completely.
Consideration:
The filter may require more frequent washing if product
is located close to spraying.
Please Note:
We recommend your spray machine be placed a minimum of
50cm behind you. This ensures minimum cleaning with your machine. HVLP
technology recirculates air from the environment. With your machine by your
side, spray tan solution will be sucked back into the filter of your spray ma-
chine, clogging up the filter in the machine, meaning more frequent cleaning.
Positioning the spray unit behind you will ensure the unit stays cleaner for
longer.
IMPORTANT!
It is important to check your filter and wash at least every 6
months, according to instructions, to maintain performance. Do not put the
filter in a dishwasher, washing machine, tumble dryer, oven, microwave or near
CLEANING & MAINTENANCE TAN.LITE & TAN.EXPERT TOWER:
