van 't Hoffstraat 12
2665 JL Bleiswijk, THE NETHERLANDS
T. 31 (0) 10 522 43 73
tv12ltman Rev. 3.01 UK 0821
E-mail: [email protected]
Website: www.tamson.com
Tamson Instruments bv
Page 16/30
ISO 9001 : 2015
NL/PRO 238239125
VAT: NL 80 66 34 984 B01
Bank account no.:
NL28 INGB 0007 350 370
NL95 RABO 0160100046
Chamber of commerce 27 16 95 41
6
OPERATING THE SYSTEM
When the bath is ready for use it can be switched on by pressing the mains switch.
The electronics are suited for both 50 and 60 Hz. Check whether the voltage of the system conforms to the
mains voltage.
6.1
Quick Start
To start operating the bath in a quick way do the
following:
Fill the bath with fluid as indicated in "Bath fluid level",
page 7,
Place the power plug, connect to mains socket,
Switch the bath on using the mains switch,
Select appropriate set point,
PID settings
All measuring results have been acquired using following
PID settings:
Pb
:=
25
I
:=
16
D
:=
0
Under different settings its possible to achieve even
better values by trimming the PID settings.
Place the bath spirit level. The four supporting feet can
be turned in and outwards for exact adjustment.
6.2
Menu Items
Use the turn-push button to select a menu item and select
the item by pressing the button. After pressing a sign
appears next to the value indicating the value can now be
changed. Pressing the button again activates the value
immediately. When the value is altered but the button is
not pressed the value will be accepted and stored after 5
seconds automatically. The menu returns back to normal
operating mode.
Menu item "Set Point"
Select the set point temperature. Resolution is 0.01°C +/-
the system accuracy.
Menu item "Offset"
The temperature displayed can be increased or
decreased with an offset ranging from +5.00 down to -
5.00 °C in steps of 0.01°C. This way the temperature
Spirit level
