Handling Interfaces- Some Words of Caution
You should note the following guidelines to avoid equipment damage
when handling any interface cards.
•
Make sure the computer's power is turned OFF and the power cord is
removed from the AC power outlet, before removing or installing
interfaces.
Caution
Plugging or unplugging an interface with the power on
can damage the interface and the computer.
•
Most interfaces contain components that are sensitive to damage from
electrostatic discharge. Use protective measures including anti-static
workstation and personal grounding devices, if possible. When
installing an interface, do not leave the interface exposed longer than
necessary.
Caution
Whenever you remove, install, or handle an interface, hold
it by its support bracket and side edges only. Do not touch its electrical
components or traces.
