6. Select ‘Install’ from the Actions menu.
7. The HP-UX swinstall utility will analyze the host system configuration
and the software package requirements. Once the analysis phase is
complete select OK to start the installation.
8. As the final stage of the configuration, the HP-UX swinstall utility will
automatically rebuild the kernel and reboot the system.
9. Once the system has rebooted you may remove the media from the
drive and store it in a safe place.
In general, the installation procedure places the files in the necessary
directories by default. Appendix B is a reference for the Unix systems
administrator, who might wish to know where these files are placed.
After the system reboots, you will need to use iosetup to configure the new
TAMS HP-IB card as a SICL instrument card, as covered in the next
section.
