tams elektronik WIB-33.2, Руководство пользователя, Страница: 17 / 24

tams
elektronik
WIB-33.2 English
Dependant on the direction of motion of the LEDs and the
outputs
Name of CVs /
Registers CV-
no. Reg.
no. Input value
(Default) Remarks and Tips
Settings
LED1 | LED2 53 25 0, 1, 2, 16,
17, 18, 32,
33, 34 (0) LED 1, 3, 5 or 7 off
at backward motion
1
LED3 | LED4 54 26 0, 1, 2, 16,
17, 18, 32,
33, 34 (0) LED 1, 3, 5 or 7 off at
forward motion
2
LED5 | LED6 55 27 0, 1, 2, 16,
17, 18, 32,
33, 34 (0) LED 2, 4, 6 or 8 off
at backward motion
16
LED7 | LED8 56 28 0, 1, 2, 16,
17, 18, 32,
33, 34 (0) LED 2, 4, 6 or 8 off
at forward motion
32
AUX1 | AUX2 57 29 0, 1, 2, 16,
17, 18, 32,
33, 34 (18) AUX1 or AUX3 off
at backward motion
1
AUX3 58 30 0, 1, 2 (0) AUX1 or AUX3 off
at forward motion
2
AUX2 off
at backward motion
16
AUX2 off
at forward motion
32
Factory settings: AUX1 switched off at forward motion, AUX2 switched off at backward motion
(CV#57 = 2 + 16 = 18)
Dimming of the LEDs and the outputs
Name of CVs /
Registers CV-
no. Reg.
no. Input value
(Default) Remarks and Tips
Settings
LED1 | LED2 59 31 0 ... 255
(255) = Reducing the voltage
applied to the output A.
1= minimum voltage
255 = maximum voltage
LED3 | LED4 60 32 0 ... 255
(255)
LED5 | LED6 61 33 0 ... 255
(255)
LED7 | LED8 62 34 0 ... 255
(255)
AUX2 | AUX1 63 35 0 ... 255
(255)
AUX3 64 36 0 ... 255
(255)
You can choose a value between 0 and 15 for each output. Enter the value directly for the odd
LEDs and outputs, for the even LEDs and outputs multiply the value by 16.
Example: For LED1 value "14" and for LED2 value "2"
à
Input value in CV#59: 14 + 2x16 = 46.
With outputs for which a fluorescent tube simulation or a random light have been
programmed, the settings in CV ##59 to 64 have no effect.
Settings for the dim switch
Name of CVs /
Registers CV-
no. Reg.
no. Input value
(Default) Value in CV#115
0
16
Function keys
for activating
the dim switch
(via LDR) 112 37 1 ... 255 (8) F1 F5 1
F2 F6 2
F3 F7 4
F4 F8 8
F0 F9 16
F10 32
F11 64
F12 128
It is possible to activate the function with several function keys. Remark: If you want to assign
the function keys F5 to F12, you have to set the value "16" CV#115 first.
Factory settings: The dim switch can be activated with F4.
Name of CVs /
Registers CV-
no. Reg.
no. Input value
(Default) Remarks and Tips
Settings
Sensivity of
the LDR
(light
depending
resistor)
113 38 1 ... 255
(176) = Limit value of the
surrounding lighting, when
the LEDs and the outputs are
switched on or off.
A higher value causes the
switching operation to be
activated at a greater light
intensity.
Remark: In default settings the LEDs and the function outputs are switched on when the
surrounding lighting under-runs the limit value. When programmed accordingly (in CV#115) the
performance can be inverted (e.g. to switch the lighting off automatically in a shadow station).
Page 17