tams elektronik mfx 49-02105 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 21

tams elektronik mfx 49-02105 Скачать руководство пользователя страница 4

tams

elektronik

English

Booster-Link

Page 18

!

1. Getting started

How to use this manual

This  manual  gives  step-by-step  instructions  for  safe  and  correct
assembly  of  the  kit  and  fitting  and  connecting  of  the  ready-built
module,  and  operation.  Before  you  start,  we  advise  you  to  read  the
whole  manual,  particularly  the  chapter  on  safety  instructions  and  the
FAQ  chapter.  You  will  then  know  where  to  take  care  and  how  to
prevent mistakes which take a lot of effort to correct.
Keep this manual safely so that you can solve problems in the future. If
you pass the kit or the ready-built module on to another person, please
pass on the manual with it.

Intended use

The Booster-Link is designed to be operated according to the
instructions in this manual with a digital model railway controlled by an
mfx

®

central unit. Any other use is inappropriate and invalidates any

guarantees.
The kit and the module should not be assembled or fitted by children
under the age of 14.
Reading, understanding and following the instructions in this manual
are mandatory for the user.

Caution:

The circuit contains integrated circuits. These are very sensitive to static
electricity. Do not touch components without first discharging yourself.
Touching a radiator or other grounded metal part will discharge you.

«
...
2
3
4
5
6
...
»

Содержание mfx 49-02105






















Отзывы:

Нет отзывов