tams elektronik mc2 EasyControl Digital System Silver..., Руководство пользователя

Страница: 13 / 76

3.1. Display and operating elements
STOP & GO
These two buttons of the mc² are used

to switch the track voltage on and off

to trigger a reset

as a trigger for displaying the IP address

to delete the internal configuration
Display
The 2-digit 7-segment display shows you essential information, e.g.

the current consumption in the booster circuit of the internal booster

the operating status (short circuit, stop, normal operation)

the IP address (due to the limitation to 2 display fields in several "sequences")

the progress of an update
RGB LEDs in the housing
The top and bottom of the mc² are made of translucent plastic. During operation, RGB LEDs
built into the housing visibly indicate the operating status of the mc² from a distance, e.g.
green for "normal operation" or red for "stop, track voltage is switched off".
Track voltage = off Track voltage = on
Your mc² | 3.3