tams elektronik
English
Multi-Timer
Connection to the outputs (operation modes 1, 2 and 3)
The Multi-Timer works like a switch. It does not provide current for the
operation of downstream circuits at it´s outputs. That is why these
need an external voltage supply (d.c. or a.c.).
When using the Multi-Timer with operation modes 1, 2 or 3 (as time
switch, pulse delay or ramdom switch), connect the downstream
circuits to the four outputs according to your needs.
Connection to the switching inputs (operation modes 1 and 2)
As soon as the contacts of the switching inputs are closed, the
switching operations will be released at the related outputs.
For the operation modes 1 or 2 you have to connect push-buttons to
the switching inputs. As an alternative you can mount upstream circuits
releasing a short switching pulse – like push-buttons.
Connection to the switching inputs (operation mode 3)
In order to affect the random control manually, you have to connect
switches (or circuits with a similar mode of operation) to the switching
inputs. As soon as the contacts of the switching inputs are closed, the
previously by the random switch set state will be "frozen".
Page 30
