English
RCD-1
Page 36
7. Mounting the RCD-1
Separating the controlled rail sections
The rail section to be controlled by the RCD-1 has to be separated from
the remaining rails. It is sufficient to cut one rail, or with 3-rail systems
the middle conductor, at both ends of the section.
Connecting the RCD-1
Mount the RCD-1 into the lead-in wire from the booster to the rails. Be
sure to connect the two rail connections at the booster and the detector
in accordance when making the RCD-1´s connections to X1 and X2.
Connect a display device (e.g. RCA-1 or RCA-24) or a unit passing on
data to a PC or to the digital control unit to X3. Be sure to connect both
the connections A and A and the connections B and B of the RCD-1 and
the accessory device to each other.
Controlled rail section
Rail 2
Rail 1
