LD-G-20
English
Page 31
The configuration variables of the LD-G-20
The following configuration variables (CVs) can be set from the digital
control unit:
§
Basic address (CV#1)
§
Starting voltage (CV#2)
§
Acceleration rate (CV#3)
§
Braking rate (CV#4)
§
Maximum voltage (CV#5) *
1
§
Version (CV#7) – read only
§
Manufacturer identification (CV#8) - read only
§
Extended address (CV#17 und CV#18) *
1
§
Configuration data 1 (CV#29)
§
Assignment of the outputs X5 and X6 to the function keys F5 to F8
(CV#39 and 40) *
1
§
Configuration data 2 (CV#49) *
1
§
Dimming of the outputs X5 and X6 (CV#50 and C51) *
1
§
Proportional component of the load control “KP” (CV#54) *
1
§
Assignment of the outputs X5 and X6 to the function keys F0 to F4
(CV#55 and 56) *
1
§
Sensitivity of the overheating protection (CV#58) *
1
§
Integral component of the load “KI” (CV#59) *
1
§
Effects for the outputs X5 and X6 (CV#60 and 61) *
1
§
Differential component of the load control “KD” (CV#64) *
1
§
Alternative velocity characteristic for mode 28 speed levels (CV#67
to 94) *
1
*
1
Not possible with central units with register programming!
Driving of the motor
The motor is driven with a PWM of 32 kHz. This guarantees a soft and
constant run of the motor. The decoder may also be used with coreless
(Faulhaber) motors as well.
