English
LD-G-20
Page 44
automatic recognition of the analogue mode during digital
operation.
Possible cause: The changing direction impulse for a Motorola
decoder has switched the decoder to analogue mode.
à
If you
simultaneously control DCC and Motorola decoders, it is advisable
to switch off the automatic recognition of the analogue mode
during digital operation.
§
The locomotive stops now and again.
Possible cause: The decoder has got too hot and the overheating
protection has been activated.
à
Possibly the decoder. Decoder overheating can be prevented by
better cooling.
à
It is possible to reduce the sensitivity of the overheating
protection (CV#58).
Caution
: In case the sensitivity of the
overheating protection is reduced too much, the decoder may be
damaged before it is activated.
à
Possibly the decoder is not suitable for controlling the
locomotive´s motor, as the motor´s current consumption is too
high. Mechanical malfunction of the locomotive as well may cause a
too high current consumption.
If you cannot find the problem, please return the decoder for repair
(address on the cover page).
Manufacturer's note
According to DIN VDE 0869, the person who brings the circuit into
operation by extension resp. mounting into a housing is the
manufacturer of the product. If he sells the product to another person
he is responsible for passing on all the relevant papers and to give his
name and address.
