![background image](http://html1.mh-extra.com/html/tams-elektronik/22-01-048/22-01-048_manual_816277007.webp)
LD-G-6
English
Page 25
EMC declaration
This product is developed in accordance with the European standards
EN 55014 and EN 50082-1, tested corresponding to the EC - directive
89/336/EWG (EMVG of 09/11/1992, electromagnetic tolerance) and
meets legal requirements.
To guarantee the electromagnetic tolerance you must take the
following precautions:
§
Connect the transformer only to an approved mains socket installed
by an authorised electrician.
§
Make no changes to the original parts and accurately follow the
instructions, circuit diagram and PCB layout included with this manual.
§
Use only original spare parts if you have to repair the kit or the
ready-built module.
Information: Speed mode
Digital control units for DCC format can send 14, 28 or 128 speed levels
depending on the model and the settings. The number of speed levels
sent by the digital control unit (=speed mode) must be set at the
decoder as well.
The speed mode set at the digital control unit for a particular
locomotive address must correspond to the speed mode saved in the
locomotive decoder. Otherwise the performance of the locomotive may
be incorrect.
Information: Configuration variables (CVs)
You can set the so-called configuration variables of the decoder from
the central unit. The programming of the variables allows the
adjustment of the decoder to the particular driving characteristics of the
locomotive and to the individual needs of the user.