Tamron MP3010M-EV, Техническое справочное руководство

Страница: 54 / 79

Tamron Co., Ltd.
54 / 79
4.5 VISCA Commands/ACK Protocol
Command Command Reply Message Comments
General Command 81 01 04 38 02 FF
(Example)
90 41 FF (Acknowledge)
+90 51 FF(Completion)
90 42 FF 90 52 FF
Returns Acknowledge when a command has been
accepted, and Completion when a command has
been executed.
81 01 04 38 FF
(Example)
90 60 02 FF(Syntax Error) Accepted a command which is not supported or a
command lacking parameters.
81 01 04 38 02 FF
(Example)
90 60 03 FF
(Command Buffer Full)
There are two commands currently being
executed, and the command could not be
accepted.
81 01 04 08 02 FF
(Example)
90 61 41 FF
(Command Not Executable)
90 62 41FF
Could not execute the command in the current
mode.
Inquiry Command 81 09 04 38 FF
(Example)
90 50 02 FF(Completion) Acknowledge is not returned for the inquiry
command.
81 09 05 38 FF
(Example)
90 60 02 FF(Syntax Error) Accepted an incompatible command.
Address Set 88 30 01 FF 88 30 02 FF Returned the device address to +1.
IF_Clear(Broadcast) 88 01 00 01 FF 88 01 00 01 FF Returned the same command.
IF_Clear(For x) 8x 01 00 01 FF z0 50 FF (Completion) Acknowledge is not returned for this command.
Command Cancel 8x 2y FF z0 6y 04 FF
(Command Canceled)
Returned when the command of the socket
specified is canceled.
Completion for the command canceled is not
returned.
z0 6y 05 FF (No Socket) Returned when the command of the specified
socket has already been completed or when the
socket number specified is wrong.
4.6 VISCA Camera-Issued Messages
ACK/Completion Messages
Command Message Comments
Acknowledge z0 4y FF(y:Socket No.)
Returned when the command is accepted.
Completion z0 5y FF(y:Socket No.)
Returned when the command has been executed.
z = 9 to F: Device a8