3.
Pair the HV3400 Wi-Fi control box to the home network with the EWelink app
a.
Provide power to the control box without it being connected to the Ghost fan
b.
Remove the lid to the HV3400 control box to gain access to the EWelink Wi-Fi device
Use a #1 sized Phillips head screw driver to remove the 4 black screws on the black box lid
c.
Locate the
ON/OFF
receiver module inside of the box
d.
Press the Pairing button on the
ON/OFF
module for 7 seconds until the Wi-Fi LED blinks 3 times
every few seconds
e.
On your smart device, open the EWelink app and tap the (+) symbol
Use the appropriate pairing method for your device as illustrated below
f.
Input your Wi-Fi SSID Network name and password
g.
Name the module in the field provided: “ON/OFF”
i.
When the EWelink device has connected to the home network successfully the Wi-Fi LED
will remain lit, confirming connection
h.
Repeat steps 3c-3g, for the LOW/HIGH module, naming the field “LOW/HIGH”
i.
Test functionality with EWelink to confirm the control box is switching (audible clicks)
4.
Connect the control box to the fan
a.
Replace the lid on the control box
b.
Connect the control box to the connector on the fan at the junction box
