background image

                                                                                                                             

Installation Manual

Ground Roof

Mount Series

[email protected]            1-800-819-7236 Ext 556

     Page 11

Installer Responsibility

The installer is solely responsible for:

i.

Complying with all applicable local or national building codes, including any that may supersede this manual.

ii.

Ensuring that Tamarack Solar and other products are appropriate for the installation and the installation 
environment.

iii.

Using only Tamarack Solar parts and installer-supplied parts as specified by Tamarack Solar. Substitution 
parts may void the warranty.

iv.

Ensuring safe installation of all electrical aspects of the PV array.

v.

Ensuring correct and appropriate des.gn parameters are used in determining the design loading used for the 
specific installation. Parameters, such as snow loading, wind speed, exposure and topographic factor should 
be confirmed with the local building official or a licensed professional engineer.

Warranty Information

Tamarack Solar warrants each Mounting Structure to be free from defects in materials and workmanship for ten (10)  
years from the date of first purchase (“Warranty Period”), when installed properly and used for the purpose for  which it is 
designed, except for the finish, which shall be free from visible peeling, or cracking or chalking under normal atmospheric 
conditions   for a period of three (3) years, from the earlier of 1) the date the installation of the  Product is completed, or 2) 
30 days after the purchase of the Product by the original Purchaser (“Finish Warranty”).  The Finish Warranty does not 
apply to any foreign residue deposited on the finish.

All installations in corrosive atmospheric conditions are excluded.

The Finish Warranty is VOID if the practices specified 

by AAMA 609 & 610-02 – “Cleaning and Maintenance for Architecturally Finished Aluminum” (www.aamanet.org) are not 
followed by Purchaser for Tamarack Solar’s aluminum-based products.

The warranty covers the replacement cost of parts to repair the product to proper working condition.  Transportation and 
incidental costs associated with warranty items are not reimbursable. The warranty does not   cover normal wear, or 
damage resulting from misuse, abuse, improper installation, negligence, or accident, or 

typographical errors in instruction 

manuals.

The Warranty does not cover any defect that has not been reported in writing to

Tamarack Solar within ten (10) 

days after discovery of such defect. Furthermore, it does not cover units that have been altered, modified, or repaired 
without written authorization from the manufacturer or its authorized representative, or units used in a manner or for a   
purpose other than that specified by the manufacturer. Tamarack Solar’s entire liability and Purchaser exclusive remedy, 
whether in contract, tort or otherwise, for any claim related to or arising out of breach of the warranty covering the 
Mounting Structures shall be correction of defects by repair, replacement, or credit, at Tamarack Solar’s discretion.   
Refurbished Mounting Structures may be used to repair or replace the Mounting Structures

Tamarack Solar shall have no liability for any injuries or damages to persons or property resulting from any cause, 
whatsoever, or any claims or demands brought against Tamarack Solar by Purchaser, any employee of Purchaser, client of 
Purchaser, end-user of the Product or other party, even if Tamarack Solar has been advised of the possibility of such claims 
or demands (collectively, “Third Party Claims”). This limitation applies to all materials provided by Tamarack Solar during 
and after the Warranty Period.

Содержание Ground Roof Mount Series













Отзывы: