Installation Manual
Ground Roof
Mount Series
[email protected] 1-800-819-7236 Ext 556
Page 10
OPTIONAL UNI-GR Intertie Installation 51-0520-005
If you are installing 2 or more UNI-GR mounts, you can tie them together to increase stability by
putting one of the UNI-GR intertie kits between each mount. This brace is adjustable from 18.25” to
32” and can be used with solar panels that have mounting holes that at between 7” and 15” from the
end of the modules.
A.
Loosely connect the inner and outer intertie channels with the 5/16” bolt, lock washer, flat
washer, and hex nut.
B.
Place the intertie as shown about midway between the rear brace connection and the end of the
panel support channels, slide the channels out to meet the panel support channels, connect with
the 5/16” hardware, torque to 132 In Lbs 6 places.
