Tamarack Industries Heat King HK300B Скачать руководство пользователя страница 45

Страница: 45 / 56

Product name: DOWFROST

™

Heat Transfer Fluid

Issue Date:

04/09/2015

Page 3 of 10

Advice for firefighters

Fire Fighting Procedures:

Keep people away. Isolate fire and deny unnecessary entry. Use water

spray to cool fire exposed containers and fire affected zone until fire is out and danger of reignition has

passed. Fight fire from protected location or safe distance. Consider the use of unmanned hose

holders or monitor nozzles. Immediately withdraw all personnel from the area in case of rising sound

from venting safety device or discoloration of the container. Burning liquids may be extinguished by

dilution with water. Do not use direct water stream. May spread fire. Move container from fire area if

this is possible without hazard. Burning liquids may be moved by flushing with water to protect

personnel and minimize property damage.

Special protective equipment for firefighters:

Wear positive-pressure self-contained breathing

apparatus (SCBA) and protective fire fighting clothing (includes fire fighting helmet, coat, trousers,

boots, and gloves). If protective equipment is not available or not used, fight fire from a protected

location or safe distance.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures:

Use appropriate safety

equipment. For additional information, refer to Section 8, Exposure Controls and Personal Protection.

Environmental precautions:

Prevent from entering into soil, ditches, sewers, waterways and/or

groundwater. See Section 12, Ecological Information.

Methods and materials for containment and cleaning up:

Small spills: Absorb with materials such

as: Cat litter. Sawdust. Vermiculite. Zorb-all®. Collect in suitable and properly labeled containers.

Large spills: Dike area to contain spill. Recover spilled material if possible. See Section 13, Disposal

Considerations, for additional information.

7. HANDLING AND STORAGE

Precautions for safe handling:

No special precautions required. Keep container closed. See

Section 8, EXPOSURE CONTROLS AND PERSONAL PROTECTION.

Spills of these organic materials on hot fibrous insulations may lead to lowering of the autoignition

temperatures possibly resulting in spontaneous combustion.

Conditions for safe storage:

Do not store in: Galvanized steel. Opened or unlabeled containers.

Store in original unopened container. See Section 10 for more specific information. Additional storage

and handling information on this product may be obtained by calling your sales or customer service

contact.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Control parameters

Exposure limits are listed below, if they exist.

Component

Regulation

Type of listing

Value/Notation

Propylene glycol

US WEEL

TWA

10 mg/m3

Exposure controls

Содержание Heat King HK300B

























































Результаты поиска

Содержание Heat King HK300B

Отзывы:

Похожие инструкции для Heat King HK300B

Бренды по названию

Популярные бренды

Tamarack Industries Heat King HK300B, Руководство по эксплуатации

Результаты поиска

Содержание Heat King HK300B

Отзывы:

Похожие инструкции для Heat King HK300B

Бренды по названию

Популярные бренды