Tamarack Industries Heat King HK300B Скачать руководство пользователя страница 10

Страница: 10 / 56

SAFE TRANSPORTATION AND STORAGE

When transporting the machine, review and follow

these instructions:

1. Be sure all bystanders are clear of the machine.

2. Back the truck up to the hitch and lower hitch

over the ball.

3. Secure with a mechanical retainer.

1. Attach to towing vehicle and secure with a me-

chanical retainer. Cross the safety chains under

the hitch and anchor to truck frame.

2. Connect the brake anchor cable to the truck

frame to activate the trailer brakes if the trailer

unexpectedly unhooks. Provide sufficient slack

for turning.

3. Check that all lights and reflectors required by

the DOT are clean and functioning.

4. Do not exceed 55 mph under ideal conditions.

5. Do not allow riders on machine.

6. Do not drink and drive.

TRANSPORTING SAFETY

TRAILER TOWING CAN

BE HAZARDOUS

WARNING

* DO NOT exceed 55 mph under ideal

conditions

* Reduce speed under adverse

weather, road or terrain conditions

* Avoid sudden lane changes, U-turns

etc.

* Sudden maneuvers may cause

tipping, rollover, jackknifing or sliding

of the trailer and without warning loss

of control of the towing vehicle may

result.

* Allow for increased braking distance

due to weight of trailer

* Read the Operator's Manual before

towing.

4. Cross the safety chains under the hitch and at-

tach to truck frame.

5. Attach the brake line to the truck frame. Be sure

to leave sufficient slack for turning.

6. Connect electrical harness to truck plug-in.
7. Raise and secure the hitch jack.

8. Reverse the Heat King set-up procedure.

9. Check and be sure that all lights are working.

10. Do not allow riders on machine.

11. Never exceed a safe travel speed.

12. Do not drink and drive.

13. Check with local highway authorities on the

specific requirements for transporting fuel oil

through their jurisdiction. Always comply with the

requirements before transporting.

Содержание Heat King HK300B

























































Результаты поиска

Содержание Heat King HK300B

Отзывы:

Бренды по названию

Популярные бренды

Tamarack Industries Heat King HK300B, Руководство по эксплуатации

Результаты поиска

Содержание Heat King HK300B

Отзывы:

Бренды по названию

Популярные бренды