Talon TP-40BA, Руководство пользователя

Страница: 20 / 40

TP-40BA (Rev 1.0)
- 17 -
TALON TECH CO. LTD.
If there is no response from the pump, the window keeps showing. If there is already the same pump
ID, the window – ‘Conflict’ shows and push ‘OK’ and reset.
▶ Maint Mode, Run Mode, Pump Reset Setting
Main Mode is to show the message of pump work on the text window. Run Mode only shows as
data code. The setting method is to touch Maint Mode , Run Mode button and input password and
touch ‘Ent’. In case of no response from pump, message of mode keeps showing. Pump reset works
right after input password. It goes to the initial screen same as power off and on. It takes about
20sec.
▶ Error Status
It reads the current ‘Error Code Data’.
In case Pump is normal, [711RE0 0] Data is shown. But, Homing Fail / Motor Alarm are same as
normal data.
★ Error Code Data which is possible to detect.
1. [711RE 0A Q ] : Limit Sensor check.
2. [711RE 0 O ] : Degas Over check.
3. [711RE 0D T ] : Degas operation impossible
★ Response Data Explanation [7 11 RE 0 0 ]
- 7 : digit no. except the first digit.
- 11 : responded Pump ID NO.
- RE : read.
- 0 0 : responded Error Code.