Talon AM3051SP Скачать руководство пользователя страница 7

Страница: 7 / 10

HINTS FOR EASY STARTING

Stand the mower on a paved drive or path where the blade is clear of the grass. If
you must start on the lawn, move to an already cut area and/or raise the cutting
height. Do not start the mower on a gravel surface.

Start a warm engine with the control in the START position.

Keep the mower clean underneath

HARD START CHECKLIST

Look for these faults

Fuel

1. Insufficient fuel in tank

2. Fuel tap shut off

3. Stale fuel

4. Water or dirt in fuel

5. Blocked air vent in fuel tank cap

Ignition

1. Loose spark plug wire

2. Dirty spark plug electrodes

3. Incorrect spark plug gap

4. Incorrect spark plug type

Other

1. Choked air filter (dirt or oil)

2. Incorrect adjustment of engine control cable

3. Cutting blade obstructed

STOPPING

1. Move the engine control to STOP.

2. Release the drive clutch lever.

Pull the drive clutch lever upwards and hold it against the handle bar to propell
the mower forward. The speed is rated at 1 m/s. (Fig. 9A)

To stop the mowers forward movement simply release the drive clutch lever.
(Fig. 9B)

NOTE: Always ensure that the drive clutch lever is released before starting the

engine.

When manouvering the mower ensure that the drive clutch is released.

Fig. 9A

Fig. 9B

DRIVE CLUTCH LEVER

WARRANTY INFORMATION

Содержание AM3051SP











Результаты поиска

Содержание AM3051SP

Отзывы:

Похожие инструкции для AM3051SP

Бренды по названию

Популярные бренды

Talon AM3051SP, Руководство пользователя

Результаты поиска

Содержание AM3051SP

Отзывы:

Похожие инструкции для AM3051SP

Бренды по названию

Популярные бренды