Any service must only be carried out by a qualified tech-
nician at an authorized service centre.
1.
Place switch in “OFF” position and unplug the power
supply before the appliance is serviced, cleaned or
maintenance is performed.
2.
Keep air intake clean and air vents free of debris to
avoid overheating the motor.
3.
Clean with a damp sponge and mild soap. Do not
squirt with water, hose with water or other liquids.
4.
No lubrication is necessary as the motor is equipped
with lifetime lubricated bearings.
5.
If the saw does not operate, turn switch to “OFF” posi-
tion and disconnect extension from power supply first,
then from blower. Check power supply for blown fuses
or tripped circuit breakers. Do not attempt to repair it
yourself. There are no serviceable parts inside.
12
AU