Einstellungen
Kurzanleitung
24
Erste Druckzeile einstellen
(TOF)
Mit der TOF-Funktion kann für jeden Papiereinzugsschacht und jedes Menü ein-
zeln die Position der obersten Druckzeile eingestellt werden.
Vor Ausführen der TOF-Funktion muß – bei Verwendung von Endlospapier – vor-
her die Abreißposition eingestellt werden (siehe oben).
Die Taste
Setup
drücken. Der Drucker wechselt in den Setup-Modus.
Die Taste
Adjust
(2) drücken.
Die Taste
TOF
(3) drücken.
Das Papier wird so weit vortransportiert, bis die Unterkante der ersten Druckzeile
auf Höhe der Abreißkante des Druckers liegt. Werkseitig ist die erste Druckposi-
tion auf
8/72
" eingestellt. Dies entspricht der zweiten Zeile von oben.
Durch Drücken der Taste
<
(2) oder
>
(3) die erste Druckzeile in die gewünschte
Position bewegen. Es können Werte von 0 bis 220/72" für Endlospapier und für
Einzelblätter eingestellt werden.
12/72" entspricht einer Druckzeile.
Adjust
Pap.Weg
Menü
Char
Online
Setup
2
1
3
4
TOF
Kopf
Tear
Online
Setup
2
1
3
4
FormAdj= 12/72"*
Setze< > Exit
Online
Setup
2
1
3
4
1. Druckzeile, Standard
Neu gesetzte 1. Druckzeile
8/72"
0–220/72"
Quick Start-de.book Seite 24 Dienstag, 22. Juni 2004 1:39 13