TallyGenicom 2150, Справочное руководство

Страница: 111 / 216

➤
Problems with the
print quality
➲
Print is too pale
1. The ribbon is used up or the ribbon cassette is not correctly fitted. Refer to
the section Changing the ribbon cassette .
2. The printhead to platen gap is not correctly set, refer to the section
Setting the printhead gap .
For printers with the AGA = always or once: Enter a correction value <0
(correction value 0 to -10). See the section
Setting the printhead gap .
➲
Smudged print 1. The ribbon is damaged (e.g. frayed). Change the ribbon as described in
the section
Changing the ribbon cassette
.
2. The printhead gap is too small, increase the gap. See the section
Setting
the printhead gap .
For printers with the AGA = always or once: Enter a correction value >0
(correction value 0 to +10). See the section
Setting the printhead gap .
BACK QUIT
?
PRINT
Reference manual Troubleshooting
101