Tally T6215, Руководство по обслуживанию

Страница: 34 / 164

T6215 Maintenance Manual
2–8
shading. If not, parameters such as individual hammer module heights and align-
ments should be checked.
Selecting And Running a Print Test
Step 1. Take the printer Offline and place it in Tech Access Mode.
Step 2. Access the Test menu with the Menu/Back key, then scroll until it displays.
Step 3. Scroll (
▲
Key) until the Pattern Category is displayed. Press Enter.
Step 4. Scroll (
▲
Key) until the desired Print Test parameter ( Print , Print2 , or Plot ) is dis-
played. Press Enter
Step 5. Scroll (
▲
Key) to the desired test pattern.
Step 6. Press Enter to begin the Print Test.
With the exception of the 1 Line print test, the print tests are continuous and will
continue to print until you depress the Clear key or the Enter key.
Fault Override Category
This category provides you a means of controlling fault reporting from the Engine Manager to
the Control Processor. Each of the following parameters has two selections: OFF and ON.
When these parameters are set to OFF, faults are reported as they happen (Fault Override is
disabled). When these parameters are set to ON, faults are not reported on the display (Fault
Override is Enabled).
Paper Motion
This parameter provides fault override for Paper Motion Faults.
Paper Out
This parameter provides fault override for Paper Out Faults.