Tally PCX-PF4110EC, Руководство пользователя

Страница: 109 / 192

Chapter 9 Troubleshooting
103
Slow or No Printing
Slow or no printing may be due to various causes. Proceed to the
following problem-and-correction procedures.
Caution! Do not disassemble the printer for further troubleshooting and/
or repair. If the problem is not found and corrected after following these
troubleshooting steps, contact a Tally Service Technician.
Slow or No Printing Possible Cause Correction
The printer will not turn
on.
The power cord is discon-
nected or damaged.
Replace and/or connect the
power cord.
There is no power to the wall
socket.
Have the circuit breakers and
power source checked by a
qualified electrician.
Unknown or garbled con-
trol panel message.
The printer was not turned on
properly.
Turn the power switch off.
Wait approximately 5 seconds.
Turn the power switch on.
Printing is slow. The printer is set to print on
special paper, which takes
twice the time as printing on
plain paper.
Set printer to plain paper print-
ing.
The printer is set to print in
High-Quality mode.
Set the printer to Standard
mode or High Speed mode
(page 49).
The personal computer cannot
process the print data quickly.
Provide proper operating
hardware and software for the
printer.
The parallel port operating
mode for the personal com-
puter and the printer is set for
Standard or Bidirectional
mode.
Set the operating mode for the
parallel port to ECP
(page 131).
The logical printer is adding or
replacing character strings.
Set the logical printer so it can-
not add or replace character
strings.