Tally Dascom 1125+, Руководство пользователя

Страница: 43 / 126

Tally Dascom 1145/1125+
28
Paper Setup Valid Settings Function
FormLen
MicroAdj
-20 -19 -18 -17 -16 -
15 -14 -13 -12 -11 -10
-9 -8 -7 -6 -5 -4 -3 -2 -
1 0 +1 +2 +3 +4 +5
+6 +7 +8 +9 +10 +11
+12 +13 +14 +15 +16
+17 +18 +19 +20
Fine tunes the form-length by n/360" (0.07mm)
based on the default value. (Valid for single papers
and fanfolds.)
Bail mode
Invalid, Standard ,
Special
The bail mode presses the paper against the print
platen during printing, but it is released for paper
loading.
Invalid: If you uninstall the lever or want to disable
the function, set this setting to “invalid”.
Standard: Release the lever for paper loading and
lower the lever to press the paper against the platen
during printing.
Special: When the paper is in tear-off position, after
the printer received printing data, the printer will
judge whether tear-off was implemented first. If tear-
off was implemented and printing position is in lever
area, then the printer will press the lever; If tear-off
was not implemented, the printer will not press the
lever.
Roll Paper No , Yes
In friction mode,
【
LF/FF
】
will not eject the paper
and feed to next page. (Assume roll paper)
5.3 Interface Setup
Interface setup Valid Settings Function
PnP No, Yes No: Disables plug and play for USB
Yes: Enables plug and play.
USB ID No , Yes No: Disables USB ID.
Yes: Enables USB ID