Talkswitch TS-9133i, Руководство по установке

Страница: 7 / 33

Model TS-9133i Installation Guide 1
Introduction
Introduction
Congratulations on your purchase of the Model TS-9133i IP Phone! The
TS-9133i communicates over an IP Network, allowing you to receive and
place calls in the same manner as a regular business telephone. This
release of the TS-9133i is capable of supporting the SIP protocol.
Phone Features
• Three line adjustable backlit display screen
• 3 line/call appearance buttons with corresponding LEDs
• 7 programmable keys with LEDs - can be programmed as feature keys,
or additional Line/Call appearances
• Speakerphone for handsfree calls
• Built-in two-port, 10/100 Ethernet switch which lets you share a
connection with your computer
• Inline power support, which eliminates power adapters
• Power Adapter
Requirements
• SIP based IP PBX system or network installed and running with a SIP
account created for the TS-9133i phone
• Access to a Trivial File Transfer Protocol (TFTP) server
• Ethernet/Fast Ethernet LAN (10/100 Mb)
• Category 5/5e straight-through cabling
• Power source
For Ethernet networks that supply in-line power to the
phone (IEEE 802.3af):
— For power, use the Ethernet cable (supplied) to connect from
thephone directly to the network. (No 48v AC power adapter
required.)
For Ethernet networks that DO NOT supply power to the phone:
— For power, use the 48V AC Power Adapter (included) to connect
from the DC power port on the phone to a power source.
or
— (optional) For power, use a Power over Ethernet (PoE) power
injector or a PoE switch. Contact your System Administrator for
more information.
About this Guide
This guide describes how to physically set up your new TS-9133i. Not all
features listed are available by default and some may depend on your
phone system or service provider. Contact your System Administrator if
you have any questions on what features and services are available to
you on your system.