Talkpool OY1210, Руководство пользователя

Страница: 17 / 20

OY1210 LoRaWAN CO2 meter, User manual, Version 1.0
17
Port Index Description Uplink
Datatype
response Encoding Valid range Access Unsolicited Description Note
1 0x03 FW build hash 6 x Uint8 Query No Unique number that identifies the
firmware version
1 0x05 Device reset Action No Reset of device
1 0x06 CPU voltage Uint8 25mV/
LSB 0-3.6V Query No Read CPU voltage. Max/min ranges
depend on battery chemistry.
1 0x0A CPU temperature Uint16
Big endian 50C - 0.01C /
LSB -50- +125 C Query No Temperature from CPU sensor with 50
°C offset. Approximately 5 °C
accuracy.
1 0x20 Status Uint8 Bitfield Query Yes
Should be 0, otherwise contact
support with error code information. Cleared through
reset
1 0x30 Measurement
interval Uint16
Big endian Seconds 15-7200 Query
Set No Measurement interval in seconds
controlling how often sensors data is
acquired. Default 60 seconds Setting
measurement
interval resets the
measurement
timer.
1 0x31 Measurement
cycles per
reporting event Uint16
Big endian
Number of
measurement
cycles 1-2000 Query
Set
No Maximum number of measurement
cycles before transmitting sensor data
over LoRa uplink. Default 20 cycles
1 0x32 CO2
concentration
variation
threshold Uint16
Big endian
PPM 0-65535 Query
Set
No Maximum CO2 concentration change
from last LoRa uplink reporting event
before inserting an additional reporting
event. Default 100ppm Set to 0 ppm to
disable all
additional
reporting events
based on CO2
level.
1 0x33 CO2
concentration
absolute threshold Uint16
Big endian
PPM 0-65535 Query
Set
No Minimum absolute CO2 concentration
level under which all additional
reporting event are omitted. Default
750ppm
1 0x34 Internal CO2
sensor status bits Uint32
Big endian
CO2 sensor
status 1-2000 Query No Query only, for internal use