How to charge the battery
Before using your Micro-Speak for the first time, please charge the battery as follows.
a. Turn your Micro-Speak OFF and connect it to a USB port on a Computer using the USB cable provided.
b. The battery icon on the screen will flash to indicate charging and you will hear an audio prompt to confirm the
USB cable has been connected and the unit is charging.
c. When the Micro-Speak is fully charged the battery icon will stop flashing and you will hear an audio prompt to
confirm charging is complete.
d. Disconnect the USB cable after the battery has finished charging.
NOTE: For the first 3 times of use we recommend that you charge your Micro-Speak for 12 hours. We also
suggest that you use up the power completely before you recharge. This process will help you to achieve the
maximum recharging capacity from your Micro-Speak. Subsequent charges should be approximately 2 to 3
hours.
NOTE: Your computer must be turned on for the Micro-Speak to charge via USB. DO NOT overcharge your
Micro-Speak or it may shorten the battery life.
USB Mains Plug Adapter
As an alternative method of charging, you can connect your Micro-Speak to a USB Mains Plug Adapter using the
cable provided. Please visit our website or call us for more details.
How to record
a. Slide the Power Switch to the ON position, the LED will turn green and you will hear an audio prompt to confirm
the unit is ready to use.
b. Press the Record button once, the LED will turn red and you will hear 1 beep. After 2 or 3 seconds the screen
will display the word RECORDING and the time lapse to indicate that recording is in progress.
c. Speak clearly into the Microphone. Alter your distance from the microphone to suit your application.
d. If you wish to pause your recording at any time, press the Play/Pause button. You will hear 2 beeps to confirm
that recording has paused. To resume recording, press the Play/Pause button again and you will hear 1 beep to
confirm that the recording has resumed.
e. When you have finished recording, press the Record button once and you will hear 3 beeps to confirm that your
message has been saved. The LED will turn back to Green.
f. Repeat the steps above to create additional recordings.
g. After each recording has been saved, Micro-Speak will automatically return to Play Mode.
NOTE: Depending on the length of your recorded message it may take a few seconds before your message is
ready to play. The file name will be displayed on line two of the screen.
NOTES: Each saved recording will be given a unique file name. All the recordings will be saved onto the internal
memory within a folder called RECORD.
