WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2
Configuration and Operation Manual
Page
23
of
53
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected]• www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.7.5. Ping and Traceroute
The Ping and Traceroute page is used to perform connectivity tests. The Ping command can be used to
determine whether a destination is reachable from the communications module or not. Traceroute helps in
determining intermediate hops to the destination IP address.
Login → Maintenance → Ping and Traceroute
Figure 27 Ping and Traceroute
To ping or traceroute:
1.
Enter an
IP Address
.
2.
Select
Ping
or
Traceroute
.
3.
Click
Apply
.
4.
The status bar indicates the command executed.
5.
The
Results
section displays the results of the executed command.
1
2
3
5
4
